System Configuration:

Processing capacity is 100-800kg/h

The whole include

1.Feeding Machine.
2.Extruder:38CrMoAlA with nitriding processing
3.Mould:40Cr  with nitriding processing.
4.Water Channel
5.Winds drying machine
6.Pelletizer machine
7.Hopper

Advantages of pet pelletizing line:

1. Increasing the operation variables and realizing the process because of two-stage machine.
2. High effective and production capacity.
3. Good at process heat-sensitive material and devolatilization operation, Such as PVC, XLPE.
4. Zero halogen cable, shield material, carbon black etc.

electric control system

1. 3x380v, AC 50 Hz. (customizable)
2. Independent operation cabinet
3. The main electrical control elements are Schneider products
4. Control button
5. The main motor is AC motor 55kW, and the speed control device of twin screw host is frequency converter
6. The speed control device of feeder is frequency conversion governor
7. The temperature control instrument adopts dual channel and intelligent type, with one temperature control in each zone.
8. The range of pressure gauge is 0 ~ 25MPa
9. Solenoid valve is used as solenoid valve
10. Heating is controlled by temperature control meter through Yudian solid state relay, and high temperature resistant wire is used
11. Electrical control cabinet control includes: temperature control system; drive system; interlocking control system

Interlocking control system

1. The oil lubrication system is interlocked with the main engine, that is, the main engine can be started only after the oil pump is started.
2. The feeding system is interlocked with the main engine, that is, the feeder can be started only after the main engine is started.
3. The pressure system is interlocked with the main engine, that is, when overpressure occurs, both the host and the feed will stop working.
4. The current is interlocked with the main engine, that is, when the current is over-current, both the host and the feed will stop working.

Selection table