Mechanical structure and working principle
This pulverizer is composed by feeder hopper, vibrating feeder, enclosure, Disk, Principal axis, The host motor, discharger fan blade, Dust collector, Electric control box, vibrating sieve and other components.
Working principle: Principal axis (rotor) of high-speed rotating generated ultrasonic vortex wave, which’s pressure will vibrate raw materals into powder (without sieve).
The requirement of Installation and Run in
1.You should be familiar with the contents of this manual, the machine structure and the role of electric buttons, the belt of cutter rotation direction must comply with the direction of the arrow marked on casing.
(1)The part of equipment’s frame is installed in suitable location, and empty out some space for operation and maintenance around.
(2)Put the Rotary valve fixed on the cyclone separator, and then connect the cyclone separator with dust collector by pipe.
(3)Connected to water, pipe, and connected to the power .
(4)To check whether the loosening of screws after installation.
3.After the installation and check-up, you can adjust the bolt which located on the door of pulverizer’s host according to different material, and the gap of disks (With plug-foot blade measuring the gap to ensure that the same space). By hand axis of rotation to ensure that there was no unusual noise, proof-reading the main electric, electric fan vibration of the direction of rotation. To ensure that the correct host before it can start, restart, the machine can produce material when the normal speed.
4.The election is expected to be appropriate (3-5mm), to charge into the control and can not overload, the main motor ammeter according to the instructions should not exceed 85A motor will be burned otherwise, should not have the metals, stones, and other hard objects to smash into damage-in room
|Model||Main motor power||Vibration Sieve Power||Air Shutter Power||Output|